Ramsey-winch FORD QM KIT 295375 User Manual download pdf (Page 3)

STEP 3

Remove R.H. vehicle bumper bracket bolts (2 bolts) and discard.

Secure R.H. mounting arm #4 to vehicle frame using (2) 1/2-13NC x 1.75” capscrews #8, (2) nuts

#11, (2) lockwashers #12, (1) nutplate #3 and (2) flat washers #13 as shown below. These

capscrews go through the outside (slotted) holes on the mounting arm flanges.

HINT: To align holes between mounting arm flanges, bumper bracket, and frame, you may need to

raise or lower the bumper slightly.

Repeat for L.H. bracket assembly #5.

REMOVE EXISTING

HARDWARE

VEHICLE FRAME

OUTSIDE MOUNTING

HOLES IN BRACKETS

ARE SLOTTED

INSTALLED IN A LATER STEP

VEHICLE FRAME

1 2 3 4 5 6

No comments

Ramsey-winch FORD QM KIT 295375 User Manual Page 3