INSTRUCTIONS FOR DISASSEMBLY
1. Remove wire rope from drum.
2. Drain oil from winch by removing (2) plugs #54, removing the lower plug first.
3. When replacing lubricant, use 264 oz of applicable lube for your climate form table on page 5,
adding 4 oz at #44 and the remaining at # 55.
55
54
54
44
4. Remove (2) nuts #208b from air cylinder #208a. Air cylinder may now be removed. If needed,
mounting bracket #201 may be removed by removing pin #204 from pin #205 and then sliding
pin out of mounting bracket. Brake band #5 may be expanded over drum flange to barrel for
easiest removal.
NOTE:
BRAKE BAND FITS
OVER DRUM FLANGE
5
14
201
208b
208a
205
204
38
6 OM-914207-0211-D
Comments to this Manuals